AEG BSE792320B User Manual download pdf (Page 54)

12. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

12.1 Notes on cleaning

• Clean the front of the oven with a soft

cloth with warm water and a mild

cleaning agent.

• To clean metal surfaces, use a

dedicated cleaning agent.

• To clean the bottom side in case of

limestone residual, use some drops of

vinegar.

• Clean the oven interior after each use.

Fat accumulation or other food

remains may result in a fire. The risk is

higher for the grill pan.

• Clean stubborn dirt with a special

oven cleaner.

• Clean all accessories after each use

and let them dry. Use a soft cloth with

warm water and a cleaning agent.

• If you have nonstick accessories, do

not clean them using aggressive

agents, sharp-edged objects or a

dishwasher. It can cause damage to

the nonstick coating.

• Dry the oven when the cavity is wet

after usage.

12.2 Recommended cleaning

products

Do not use abrasive sponges or

aggressive detergents. It can cause

damage to the enamel and the stainless

steel parts.

You can buy our products at

www.aeg.com/shop and at the best

retailer shops.

12.3 Removing the shelf

supports

Before maintenance, make sure that the

oven is cool. There is a risk of burns.

To clean the oven, remove the shelf

supports.

1. Pull carefully the supports up and out

of the front catch.

2

3

1

2. Pull the front end of the shelf support

away from the side wall.

3. Pull the supports out of the rear

catch.

Install the shelf supports in the opposite

sequence.

12.4 Steam Cleaning

Remove as much dirt as possible

manually.

Remove the accessories and the shelf

support to clean the side walls.

The steam cleaning functions support

the steam cavity cleaning of the oven.

Before you start a cleaning

procedure, make sure that

the oven is cool.

When the steam cleaning function works,

the light is off.

1. Fill the water drawer to the maximum

level.

2. Choose the steam cleaning function

in the menu: Cleaning.

Steam Cleaning - the duration of the

function is around 30 minutes.

a) Turn on the function.

b) When the programme ends a

signal sounds.

c) Press a sensor field to turn off the

signal.

Steam Cleaning Plus - the duration

of the function is around 75 minutes.

a) Spray a suitable detergent

uniformly in the oven cavity on

both enamel and steel parts.

b) Turn on the function.

After around 50 minutes a signal

sounds. The first part of the

programme ends.

c) Press .

www.aeg.com

54

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 63 64

Comments to this Manuals

No comments