AEG 825D-m User Manual download pdf (Page 7)

Installation

Safety warnings for kitchen unit installer

● When used as an extractor unit, the hood must be fitted with a

120mm diameter hose.

● If the fumes must be forced out through the wall, you must obtain

a MKZ sizable wall exhaust pipe (with external exhaust and air

intake), E-Nr.- 610 899 004 (Ø 120 mm) which is one of our

optional parts.

● When installing the hood, make sure you respect the follow-

ing minimum distance from the top edge of the cooking

hob/ring surfaces:

Electric hob 600 mm

Gas hob 650 mm

Electric cooker 685 mm

Gas cooker 787 mm

● The cooker hood must not be installed above a cooker with a

high level grill.

● The air outlet must not be connected to chimney flues or combus-

tion gas ducts. The air outlet must under no circumstances be

connected to ventilation ducts for rooms in which fuel-burning

appliances are installed.

● It is advisable to apply for authorization from the relevant

controlling authority when connecting the outlet to an unused

chimney flue or combustion gas duct.

The air outlet installation must comply with the regulations laid

down by the relevant authorities.

● When the unit is used in its extractor version, a sufficiently large

ventilation hole must be provided, with dimensions that are

approximately the same as the outlet hole.

● National and regional building regulations impose a number of

restrictions on using hoods and fuel-burning appliances connected

to a chimney, such as coal or oil room-heaters and gas fires, in the

same room.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

AEG 825D-m User Manual Page 7