1 PROTECT A.PROTECT A.PROTECT A.PROTECT A. PROTECT A. 1000 PROTECT A. 1400 OPERATING INSTRUCTION UPS
10 effective protection against mains voltage peaks and high-frequency faults. In case of sustained mains undervoltage or overvoltage within
11 4 Set-Up and Operation Installing the UPS is as easy as following the steps shown. 4.1 Inspection Remove the UPS from its packaging and i
12 4.3 Charging This unit is shipped from the factory with its internal battery fully charged, however, some power may be lost du
13 Use one more internet line cable and plug one end of the internet line cable to the “Out” socket at the back of the PROTEC
14 After removing the front cover, follow Fig. 2 above to remove partition by unscrewing it. Then follow Fig. 3 to remove the battery. 4
15 In conjunction with the "intelligent" UPS, this ensures that the availability of IT components and data security are guaranteed.
16 5.1 Specifications MODELL PROTECT A. 1000 PROTECT A. 1400 Type 1000 VA / 600 W 1400 VA / 840 W Input voltage 220 Vac / 230 Vac / 240 Vac
17 6 Trouble shooting SYMPTOM CAUSE REMEDY Missing battery Charge battery up to 4 hours Battery fault Replace with the same type of batter
18 Guarantee certificate Type: …….…………………... Serial-no.: ……………………..……………...
2 1 Notes on these Operating Instructions Duty to Provide Information These operating instructions will help you to install and operate the Uninter
3 etc. entered into by AEG and its representatives without prior notification in the event of maintenance and repair work being carried out with anyt
4 1.1 Declaration of Conformity
5 2 Safety 2.1 Important Safety Instructions Read these operating instructions carefully prior to commissioning of the PROTECT A. UPS a
6 The output may be live, even if the UPS is not connected to the mains supply, as the UPS has its own internal power supply (bat
7 ♦ Never connect the mains input to the UPS output! ♦ Ensure that no fluids or foreign bodies can penetrate the UPS! ♦ Do not block the side air
8 Batteries can cause electric shocks and high short-circuit currents. Therefore, take the following safety precautions when working with b
9 3 System Description i PROTECT A. is an uninterruptible power supply (UPS) for essential loads such as personal computers (PCs) or
Comments to this Manuals