AEG UN 6.03 Technical Information download pdf (Page 104)

Practical A.E.G Upgrade 2006

ROF-wise, why (and why not) should I replace the stock plastic

bushings with metal bushings?

How about oil channel bushings?

If you plan to significantly increase the ROF (such as a 25~30% improvement),

the stock plastic bushings may get worn out very fast. Switching to metal

bushings is therefore recommended.

Metal bushings by themselves won’t improve the ROF. They will make your gun

last longer though.

* The stock bushings used by the ACX/Cybergun AEGs are slightly smaller in

diameter, meaning you will need to manually enlarge the bushing space holders

on the mechbox if you are to replace them with TM compatible metal bushings.

Oil Channel Bushings are metal bushings with oil channels molded into them.

They do no deliver any observable performance benefits, and it has been

reported that they can lead to uneven wear on the gear axle.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 156 157

No comments

AEG UN 6.03 Technical Information Page 104