Aeg SKZ81440C0 User Manual download pdf (Page 19)

Problem Possible cause Solution

Water flows on the

rear plate of the re-

frigerator.

During the automatic de-

frosting process, frost de-

frosts on the rear plate.

This is correct.

The temperature in

the appliance is too

low/high.

The temperature regulator

is not set correctly.

Set a higher/lower temper-

ature.

The door is not closed cor-

rectly.

Refer to "Closing the

door".

The product temperature

is too high.

Let the product tempera-

ture decrease to room tem-

perature before storage.

Many products are stored

at the same time.

Store less products at the

same time.

The temperature in

the refrigerator is too

high.

There is no cold air circula-

tion in the appliance.

Make sure that there is cold

air circulation in the appli-

ance.

Upper or lower

square is shown in

the temperature Dis-

play.

An error has occurred in

measuring the tempera-

ture

Call your service represen-

tative (the cooling system

will continue to keep food

products cold, but temper-

ature adjustment will not be

possible).

dEMo appears on the

Display.

The appliance is in dem-

onstration mode (dEMo).

Keep pressed approximate-

ly 10 sec. the OK button

since a long sound of buz-

zer is heard and the Display

shut off for a short while:

appliance start works regu-

larly

REPLACING THE LAMP

The appliance is equipped with a long-

life LED interior light.

Only service is allowed to replace the

lighting device. Contact your Service

Center

CLOSING THE DOOR

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer

to "Installation".

3. If necessary, replace the defective

door gaskets. Contact the Service

Center.

ENGLISH 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Comments to this Manuals

No comments