AEG BP7314001M User Manual download pdf (Page 35)

• If you have nonstick accessories, do

not clean them using aggressive

agents, sharp-edged objects or a dish-

washer. It can cause damage to the

nonstick coating.

12.1 Pyrolytic cleaning

1.

Remove all accessories and remova-

ble shelf supports.

Do not start the pyrolytic

cleaning if:

– You did not remove the shelf

support or telescopic runners

(if supplied). In some models,

the display shows "C1" when

this error occurs.

– You did not remove the core

temperature sensor plug from

the socket. In some models,

the display shows "C2" when

this error occurs.

– You did not fully close the

oven door. In some models,

the display shows "C3" when

this error occurs.

2.

Remove the worst dirt manually.

3.

Set the Pyro Cleaning function (refer

to “Oven functions”).

4.

Touch or to set the duration

of the cleaning procedure:

– 1 – 1:00 for a low degree of dirt

– 2 – 1:30 for a usual degree of dirt

– 3 – 2:30 for a high degree of dirt.

Touch

to activate the pyrolytic

cleaning.

Useful information:

You can use the End function to delay

the start of the cleaning procedure.

During the pyrolytic cleaning the door is

locked. The symbol

and the bars of

the heat indicator come up, until the

door unlocks.

The door unlocks when the temperature

inside the oven is under safety condi-

tions and the pyrolytic cleaning finishes.

During the pyrolytic cleaning the lamp is

deactivated.

Cleaning reminder

To remind you that the pyrolytic clean-

ing is necessary the cleaning reminder

symbol

flashes in the display after

each deactivation of the appliance for

the next 10 seconds.

The cleaning reminder goes

out:

• After the end of the pyrolytic

cleaning

• When you deactivate it in the

basic settings (refer to "Set-

tings menu")

12.2 Shelf supports

Removing the shelf supports

You can remove the shelf supports to

clean the side walls.

1.

Pull the front of the shelf support

away from the side wall.

ENGLISH 35

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments