AEG BP7314001M User Manual download pdf (Page 39)

Problem Possible cause Remedy

The lamp does not oper-

ate.

The lamp is defective. Replace the lamp.

The display shows C1. You want to start the py-

rolytic cleaning but you

did not remove the shelf

support/telescopic run-

ners.

Remove the shelf sup-

port/telescopic runners.

The display shows C2. You want to start the py-

rolytic cleaning, keep

warm or defrost function

but you did not remove

core temperature sensor

plug from the socket.

Remove the core tem-

perature sensor plug

from the socket.

The display shows C3. You want to start the py-

rolytic cleaning but you

did not fully close the

door.

Fully close the door.

The display shows F102. The door lock is defec-

tive.

• Fully close the door.

• Deactivate the appli-

ance with the house

fuse or the safety

switch in the fuse box

and activate it again.

• If the display shows

F102 again, contact

the Customer Care

Department.

The display shows an er-

ror code that is not in

this list.

There is an electrical

fault.

• Deactivate the appli-

ance with the house

fuse or the safety

switch in the fuse box

and activate it again.

• If the display shows

the error code again,

contact the Customer

Care Department.

The lamp does not oper-

ate.

You have selected an

ECO function or Moist

Fan Baking. In these

functions the light can-

not be activated.

The light cannot be acti-

vated because these

functions help to save

energy.

If you cannot find a solution to the prob-

lem yourself, contact your dealer or the

service centre.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the appliance cavi-

ty.

We recommend that you write the data here:

ENGLISH 39

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments