AEG BP7004001M User Manual download pdf (Page 13)

"00:00" and the Count Up Timer starts

to count up again.

You cannot use the Count Up

Timer when Duration or End is

set.

7.2 Setting the DURATION

1.

Activate the appliance and set an

oven function and temperature.

2.

Touch again and again until the

display shows

. flashes in the

display.

3.

Use or to set the minutes for

DURATION.

4.

Touch to confirm.

5.

Use or to set the hours for

DURATION.

If you touch or while you

set the DURATION, the appli-

ance switches to the setting of

the END function.

6.

When the set time ends, an acoustic

signal sounds for two minutes.

and time setting flash in the dis-

play. The appliance deactivates.

Touch a sensor field or open the

oven door to stop the acoustic sig-

nal.

7.

Deactivate the appliance.

7.3 Setting the END

1.

Activate the appliance and set an

oven function and temperature.

2.

Touch again and again until the

display shows

. flashes in the

display.

3.

Use or to set the END (first

you set the minutes and then the

hours) and

or to confirm.

4.

When the set time ends, an acoustic

signal sounds for two minutes.

symbol and the time setting flash

in the display. The appliance deacti-

vates.

5.

Touch a sensor field or open the

oven door to stop the acoustic sig-

nal.

6.

Deactivate the appliance.

7.4 Check result (selected

models only)

If you set the END or DURATION func-

tion, two minutes before the end of

cooking an acoustic signal sounds and

the lamp activates. The appliance goes

to the setting of the END or DURATION

function. During these two minutes you

can examine the results of the cooking,

and, if necessary, add the END or DURA-

TION time.

7.5 Setting the SET+GO

1.

Set an oven function (or programme)

and temperature (refer to "Setting

the oven function" and "Changing

the temperature").

2.

Set the DURATION (refer to "Setting

the DURATION").

3.

Touch again and again until

flashes in the display.

4.

Touch to set the SET+GO func-

tion.

The display shows

and with an

indicator. This indicator shows which

clock function is activated.

5.

Touch a sensor field (apart from

ON / OFF) to start the SET+GO

function.

You can use the SET+GO func-

tion only when the DURATION is

set.

7.6 Setting the MINUTE

MINDER

Use the MINUTE MINDER to set a

countdown (maximum 2 h 30 min). This

function has no effect on the operation

of the oven. You can set the MINUTE

MINDER at any time and also when the

appliance is off.

1.

Touch . and "00" flash in the

display.

2.

Use or to set the MINUTE

MINDER. First you set the seconds,

then the minutes and the hours.

3.

Touch or the MINUTE MINDER

starts automatically after five sec-

onds.

ENGLISH 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Comments to this Manuals

No comments