AEG HK854326IB User Manual download pdf (Page 9)

4.2 Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after

you activate the hob,

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking

zone cool down before you use the

hob again.

• you use incorrect cookware. The

symbol comes on and the cooking

zone deactivates automatically after 2

minutes.

• you do not deactivate a cooking zone

or change the heat setting. After

some time

comes on and the hob

deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting The hob deacti-

vates after

, 1 - 3

6 hours

4 - 7 5 hours

8 - 9 4 hours

10 - 14 1.5 hour

4.3 The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat

setting or move your finger along the

control bar until you reach the correct

heat setting.

4.4 Using the cooking zones

Put the cookware on the cross / square

which is on the surface that you cook.

Cover the cross / square fully. Induction

cooking zones adapt to the dimension of

the bottom of the cookware

automatically. You can cook with the

large cookware on two cooking zones at

the same time.

4.5 Bridge function

The function operates when

the pot covers the centres of

the two zones.

This function connects two left side

cooking zones and they operate as one.

First set the heat setting for one of the

left side cooking zones.

To activate the function: touch . To

set or change the heat setting touch one

of the control sensors.

To deactivate the function: touch .

The cooking zones operate

independently.

When you use only one cooking zone of

the pair we recommend that you use the

rear cooking zone. Also when you use

large cookware we recommend that you

put it near to the rear cooking zone.

4.6 Automatic Heat Up

Activate this function to get a desired

heat setting in a shorter time. When it is

on, the zone operates on the highest

setting in the beginning and then

continues to cook at the desired heating

setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch

( comes on).

Immediately touch a desired heat

setting. After 3 seconds comes on.

To deactivate the function: change the

heat setting.

ENGLISH

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 67 68

Comments to this Manuals

No comments