AEG 49002VMN User Manual download pdf (Page 11)

2.

Set the heat setting for the cooking

zone. You can also set it after you

activate the timer.

3.

To activate the timer or change the

set time, touch + or - on the hob

control panel. The maximum time

you can set is 99 minutes.

The indicator of the cooking zone

flashes slowly. The timer starts to

count down.

4.

To see the remaining time, touch

again and again until the indicator

for the necessary cooking zone flash-

es quickly. The display shows the re-

maining time.

When the set time ends, 00 flashes

and an acoustic signal sounds. The

cooking zone deactivates.

5.

Touch to stop the signal.

To deactivate the timer before

the set time is completed, set the

cooking zone with

and touch

-. The remaining time counts

down to 00. The indicator of the

cooking zone goes out.

You can use the timer as a Minute Mind-

er when the cooking zones do not oper-

ate. To do this, set the cooking zone and

activate the timer but do not set the

heat setting.

5.9 Stop and Go

The Stop and Go function sets all

cooking zones that operate to the lowest

heat setting (

).

This function does not deactivate the

timer function.

•

To activate this function, touch

.

The display shows the symbol

.

•

To deactivate this function, touch

.

The display shows the heat setting

that you set before.

When the Stop and Go function

operates, you cannot change the

heat settings.

5.10 Lock

When the cooking zones operate, you

can lock the control panel but not

. It

prevents an accidental change of the

heat setting.

This function does not deactivate the

timer function.

1.

Set the heat setting.

2.

To activate this function, touch .

The display shows the symbol

for

4 seconds.

3.

To deactivate this function, touch

. The display shows the heat setting

that you set before.

When you deactivate the appli-

ance, the function is deactivated.

When you activate the appliance, the

display shows SAFE .

The lock function locks or un-

locks the oven interface at the

same time.

5.11 Residual heat indicator

The residual heat indicator comes on

when a cooking zone is hot.

WARNING!

There is a risk of burns from re-

sidual heat.

5.12 Child safety device

This function prevents an accidental op-

eration of the hob.

Activating the child safety device

1.

Touch to activate the hob. Do

not set the heat settings.

2.

Touch for 4 seconds. The display

shows the symbol

. The child

safety device operates.

3.

Touch to deactivate the hob.

Deactivating the child safety device

1.

Touch to activate the hob. Do

not set the heat settings.

2.

Touch for 4 seconds. The display

shows the symbol

.

3.

Touch to deactivate the hob.

Overriding the child safety device for

one cooking session

1.

Touch to activate the hob. The

display shows the symbol

.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Comments to this Manuals

No comments