AEG 30006VL-WN User Manual download pdf (Page 26)

A

A

B

Minimum distances

Dimension mm

A 2

B 685

12.3 Levelling of the appliance

Use small feet on the bottom of

appliance to set the appliance top

surface level with other surfaces.

12.4 Anti-tilt protection

CAUTION!

Install the anti-tilt protection

to prevent the appliance

from falling under incorrect

loads. The anti-tilt

protection only works when

the appliance is put in a

correct area.

Your appliance has the

symbols shown on the

pictures (if applicable) to

remind you about the

installation of the anti-tilt

protection.

CAUTION!

Make sure you install the

anti-tilt protection at the

correct height.

Make sure that the surface behind the

appliance is smooth.

1. Set the correct height and area for

the appliance before you attach the

anti-tilt protection.

2. Install the anti-tilt protection 77 mm

down from the top surface of the

appliance and 49 mm from the left

side of the appliance into the circular

hole on the bracket. See the

illustration. Screw it into the solid

material or use applicable

reinforcement (wall).

3. You can find the hole on the left side

at the back of the appliance. See the

illustration. Lift the front of the

appliance (1) and put it in the middle

of the space between the cupboards

(2). If the space between the bench

cupboards is larger than the width of

the appliance, you must adjust the

side measurement to centre the

appliance.

www.aeg.com

26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments