AEG 30006VL-WN User Manual download pdf (Page 24)

10.6 Replacing the lamp

Put a cloth on the bottom of the interior

of the appliance. It prevents damage to

the lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The back lamp

The lamp glass cover is at

the back of the cavity.

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the oven lamp with a

suitable 300 °C heat-resistant oven

lamp.

Use the same oven lamp type.

4. Install the glass cover.

10.7 Removing the drawer

WARNING!

When the oven is in use,

heat can build up in the

drawer. Do not keep

flammable things in there

(e.g. cleaning materials,

plastic bags, oven gloves,

paper, cleaning sprays, etc.).

The drawer below the oven can be

removed for cleaning.

1. Pull the drawer out until it stops.

1

2

2. Lift the drawer at a small angle and

remove it from the drawer support

rails.

Inserting the drawer:

1. To insert the drawer set the drawer

on the support rails. Make sure that

the catches engage correctly into the

rails

2. Lower the drawer until it is horizontal

and push it in.

11. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

11.1 What to do if...

Problem Possible cause Remedy

You cannot activate the ap-

pliance.

The appliance is not connec-

ted to an electrical supply or

it is connected incorrectly.

Check if the appliance is cor-

rectly connected to the elec-

trical supply.

www.aeg.com24

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments