AEG S53220CSX2 User Manual download pdf (Page 31)

Problem Possible cause Solution

The compressor operates

continually.

Temperature is set incor-

rectly.

Refer to "Operation" chapter.

Many food products were

put in at the same time.

Wait some hours and then

check the temperature again.

The room temperature is

too high.

Refer to climate class chart on

the rating plate.

Food products placed in

the appliance were too

warm.

Allow food products to cool to

room temperature before stor-

ing.

The door is not closed cor-

rectly.

Refer to "Closing the door".

There is too much frost and

ice.

The door is not closed cor-

rectly or the gasket is de-

formed/dirty.

Refer to "Closing the door".

The water drainage plug is

not correctly positioned.

Position the water drainage

plug in the correct way.

Food products are not

wrapped properly.

Wrap the food products bet-

ter.

Temperature is set incor-

rectly.

Refer to "Operation" chapter.

Water flows on the rear

plate of the refrigerator.

During the automatic de-

frosting process, frost

melts on the rear plate.

This is correct.

Water flows inside the refrig-

erator.

The water outlet is clog-

ged.

Clean the water outlet.

Food products prevent

that water flows into the

water collector.

Make sure that food products

do not touch the rear plate.

Water flows on the floor. The melting water outlet is

not connected to the

evaporative tray above the

compressor.

Attach the melting water out-

let to the evaporative tray.

Door is misaligned or inter-

feres with ventilation grill.

The appliance is not level-

led.

Refer to "Levelling".

The temperature in the ap-

pliance is too low/too high.

The temperature regulator

is not set correctly.

Set a higher/lower tempera-

ture.

The door is not closed cor-

rectly.

Refer to "Closing the door".

ENGLISH 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 75 76

Comments to this Manuals

No comments