AEG A92300HLW0 User Manual download pdf (Page 28)

10. INSTALLATION

10.1 Positioning

WARNING!

If you are discarding an old appli-

ance that has a lock or catch on

the lid, you must ensure that it is

made unusable to prevent young

children being trapped inside.

The appliance shall have the

plug accessible after installation.

This appliance can be installed in a dry,

well ventilated indoor (garage or cellar),

but for optimum performance install this

appliance at a location where the ambi-

ent temperature corresponds to the cli-

mate class indicated on the rating plate

of the appliance:

Cli-

mate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

10.2 Electrical connection

Before plugging in, ensure that the volt-

age and frequency shown on the rating

plate correspond to your domestic pow-

er supply.

The appliance must be earthed. The

power supply cable plug is provided

with a contact for this purpose. If the do-

mestic power supply socket is not earth-

ed, connect the appliance to a separate

earth in compliance with current regula-

tions, consulting a qualified electrician.

The manufacturer declines all responsi-

bility if the above safety precautions are

not observed.

This appliance complies with the E.E.C.

Directives.

10.3 Ventilation requirements

1.

Put the freezer in horizontal position

on a firm surface. The cabinet must

be on all four feet.

2.

Make sure that the clearance be-

tween the appliance and rear wall is

5 cm.

3.

Make sure that the clearance be-

tween the appliance and the sides is

5 cm.

The airflow behind the appliance must

be sufficient.

11. NOISE

There are some sounds during normal

running (compressor, refrigerant circula-

tion).

28

www.aeg.com

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

Comments to this Manuals

No comments