AEG A83400HLW0 User Manual download pdf (Page 17)

Replacing the lamp

1. Disconnect the mains plug from the

mains socket.

2. Replace the used lamp with a new lamp

of the same power and specifically de-

signed for household appliances. (the

maximum power is shown on the lamp

cover)

3. Connect the mains plug to the mains

socket.

4. Open the lid. Make sure that the lamp

comes on.

WARNING!

Do not remove the lamp cover at the time of replacement.

Do not operate the freezer if the lamp cover is damaged or missing.

TECHNICAL DATA

Dimensions Height × Width × Depth (mm): Further technical information are situ-

ated in the rating plate on the external

right side of the appliance.

876 × 1611 × 665

Rising Time 58 hours

INSTALLATION

Positioning

WARNING!

If you are discarding an old appliance that has a lock or catch on the lid, you must ensure

that it is made unusable to prevent young children being trapped inside.

The appliance shall have the plug accessible after installation.

This appliance can be installed in a dry, well ventilated indoor (garage or cellar), but for op-

timum performance install this appliance at a location where the ambient temperature cor-

responds to the climate class indicated on the rating plate of the appliance:

Climate class Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Technical data 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

No comments

AEG A83400HLW0 User Manual Page 17