AEG FFB93706PM User Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
automatically activated in next cycles.
This configuration can be changed at any
time.
Every time ECO 50° is
activated, XtraDry is off and
needs to be chosen
manually.
Activating XtraDry deactivates
TimeManager and vice versa.
7.4 TimeManager
TimeManager allows to reduce the
duration of a selected programme by
approximately 50%.
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
Activate TimeManager the following way:
Select a programme and press
.
If TimeManager is applicable to the
selected programme, the display shows
two values with corresponding
programme duration:
Fast: select the value to activate
TimeManager and press to
confirm.
Normal: select the value to
deactivate TimeManager and
press to confirm.
Activating TimeManager deactivates
XtraDry and vice versa.
7.5 Child Lock
The option locks the touch buttons to
prevent accidental operation. Child Lock
can be activated while a programme is
running or when the appliance is
activated and ready for use.
Activating Child Lock
deactivates AirDry.
Activate Child Lock the following way:
Short press simultaneously and .
The display informs that Child Lock is
activated.
To deactivate Child Lock, repeat the
procedure.
8.
BEFORE FIRST USE
When you activate the appliance for the
first time, you need to set the language.
The default language is English.
1. Set the language.
Press to confirm English.
Select another language and
press
to confirm.
2. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
3. Fill the salt container.
4. Fill the rinse aid dispenser.
5. Open the water tap.
6. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the
baskets.
After starting a programme, it may take
up to 5 minutes for the appliance to
recharge the resin in the water softener.
It seems that the appliance is not
working. The washing phase starts only
after this procedure is completed. The
procedure is repeated periodically.
8.1 The water softener
The water softener removes minerals
from the water supply, which would have
a detrimental effect on the washing
results and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
ENGLISH
13
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Comments to this Manuals

No comments