AEG F56312IM0 User Manual download pdf (Page 11)

7. OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate

or deactivate options while a

programme is running.

7.1 Multitab

Activate this option when you use multi-

tablets that integrate the salt, rinse aid

and detergent functions. They can also

contain other cleaning or rinsing agents.

This option deactivates the release of

salt. The salt indicator does not come on.

With the use of this option the

programme duration is prolonged to

increase the cleaning and drying results

with the use of multi-tablets.

Multitab is not a permanent option and

must be selected at every cycle.

How to activate Multitab

Press Multitab.

The related indicator comes on.

7.2 TimeSaver

This option increases the pressure and

the temperature of the water. The

washing and the drying phases are

shorter.

The total programme duration decreases

by approximately 50%.

The washing results are the same as with

the normal programme duration. The

drying results can decrease.

How to activate TimeSaver

Press TimeSaver, the related indicator

comes on.

If the option is not applicable to the

programme, the related indicator does

not come on or it flashes quickly for a

few seconds and then goes off.

The display shows the updated

programme duration.

8. BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the

baskets.

When you start a programme, the

appliance can take up to 5 minutes to

recharge the resin in the water softener.

It seems that the appliance is not

working. The washing phase starts only

after this procedure is completed. The

procedure will be repeated periodically.

8.1 The salt container

CAUTION!

Only use salt specifically

designed for dishwashers.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in the daily use.

How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt

container (Only for the first time).

3. Fill the salt container with dishwasher

salt.

ENGLISH

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments