AEG F45010W0 User Manual

FAVORIT 45010ENDISHWASHER USER MANUAL

4. Load cutlery and dishes into the appliance.5. Set the correct washing programme for the type of load and soil.6. Fill the detergent dispenser with

Manual adjustmentTurn the water hardness dial to the position 1 or 2(refer to the table).Electronic adjustmentMake sure that the appliance is deactiva

USE OF DETERGENT AND RINSE AID82456173Use of detergentTo help the environment, do not use more than the correct quantity of detergent.Follow the deter

Adjust the rinse aid dosageFactory set: position 4.You can set the rinse aid dosage between position 1 (lowest dosage) and position 6 (highestdosage).

• Mix the spoons with other cutlery to prevent them to bond together.• When you put the items in the baskets, make sure that the water can touch all s

Put the knives with the handles up.Mix the spoons with other cutlery to prevent themto bond together.Use the cutlery grid. If the dimensions of the cu

Maximum height of the dishes in: the upper basket the lower basketHigher position 20 cm 31 cmLower position 24 cm 27 cmDo these steps to move the upp

Programme Type of soil Type of load Programme description3)Normal soil Crockery and cutlery PrewashWash 50 °CRinsesDry1) The appliance senses the type

• The delay start time flashes no more in the display• The phase indicators of the set washing programme go off.5. When the countdown is completed, th

If you do not deactivate the appliance at the end of the washing programme, the appliancestays on standby.• To decrease energy consumption during the

FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno

1. To unlock the filters (A) and (B), turn thehandle on the microfilter (B) approxi-mately 1/4 counterclockwise and remove.2. Hold the coarse filter (

Malfunction Possible cause Possible solutionThe appliance does not fill withwater.The water tap is blocked orthere is limescale on it.Clean the water

The washing results and drying results are not satisfactoryProblem Possible cause Possible solutionThe dishes are not clean. The washing programme was

2. Turn the programme knob counterclockwise until the programme marker is alignedwith the first washing programme on the control panel.3. Release the

WARNING!To discard the appliance, follow the procedure:• Pull the mains plug out of the socket.• Cut off the mains cable and mains plug and discard th

3. Lift the worktop and move it from thefront slots (3).4. Use the adjustable feet to adjust the levelof the appliance.5. Install the appliance under

26

27

www.aeg-electrolux.com/shop 156953720-A-382010

CONTENTS4 Safety information7 Product description7 Control panel9 Use of the appliance10 Setting the water softener11 Use of dishwasher salt12 Use of

SAFETY INFORMATIONBefore the installation and use, read this manual carefully:• For your safety and the safety of your property.• To help the environ

• Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwashercleaning agent, liquid detergent). This can cause damage to t

• Always use a correctly installed shockproof socket.• Do not use multiple plugs and extension cables. There is a risk of fire.• Do not replace or cha

PRODUCT DESCRIPTION1 Upper basket2 Water hardness dial3 Salt container4 Detergent dispenser5 Rinse aid dispenser6 Rating plate7 Filters8 Lower spray a

1 Off position2 Programme marker3 Indicators4 Display5 Start button6 Delay button7 Multitab button8 Programme knobIndicatorsThe indicator comes on whe

Multitab buttonPress this button to activate or deactivate the multitab function (refer to 'Multitab func-tion').Programme knobWith the prog