AEG AR 4023 DVD Instruction Manual download pdf (Page 36)

ENGLISH

Fault Symptoms Cause Solution

CD works

intermittently

(dropouts).

The CD is dam-

aged.

Try another CD. If

this works correctly,

the rst CD is prob-

ably damaged.

The CD is dirty. Clean the CD.

The device

may have been

installed in the

vehicle at the

wrong angle.

Please note that a

maximum inclina-

tion of 20° degrees

should not be

exceeded!

No function. The ignition is Turn the ignition key

to “ON” or “ACC”.

switchedo. Replace the fuse by

another 15 A fuse.

Device cannot

be switched on

oroviathe

ignition.

Incorrect con-

nection (each car

manufacturer

wires the ISO

connection in the

vehicledier-

ently).

Please contact your

car workshop or a

vehicle specialist for

connection adapters

may specically for

your model.

The device

does not work

correctly (EJECT,

LOAD, PLAY).

The microcom-

puter has been

interfered with by

electromagnetic

elds.

Remove the CD and

insert it again.

Switch the device

oandonagain.

The device can-

not be operated,

but “hangs up”.

The control

processor of the

device may have

been blocked

by overvoltage

or undervoltage

in the vehicle

electrical system.

Press the RESET but-

ton.

No radio recep-

tion.

The antenna cable

is not connected.

Insert the antenna

cable rmly into the

antenna socket of

the device.

Poor radio

reception.

It is possible that

your vehicle has

a special antenna

(phantom-pow-

ered antenna.)

Please contact your

car workshop or a

vehicle specialist.

(For other manu-

facturers there are

specic phantom

power supply adapt-

ers and voltage

adapters available.)

In automatic

search mode the

radio does not

stop at a trans-

mitting station.

The transmission

signals are too

weak.

Tune in to a radio

station manually.

Fault Symptoms Cause Solution

DVD cannot be

played.

DVD not nalised. Use a nalised DVD.

Audio or Video

interference

from video les

which are played

back via USB or

memory card.

Data ow is

"sluggish“. (See

section "Operat-

ing Instructions“

on page 7 for a

detailed explana-

tion).

Pause play using the

Tbutton. Wait a

few seconds and re-

start playback.

Handling a CD/DVD

Cleaning the CD

BeforeplayingaCD,wipeito

with a clean, dust-free cleaning

cloth. Pull out the CD in the

direction of the arrow.

CAUTION: do not use any solvents such as petrol

or thinning agents. commercially available cleaning sub-

stances or antistatic sprays will damage the device.

Inserting the CD

If the CD is inserted with the

printed side facing downwards,

the device may be damaged.

Always insert the CD with the

label facing upwards.

CAUTION: if there is already a cd in the cd slit, do

not try to insert a second cd. this may damage the

device.

Touching the CD

Always hold CDs by the edge. In

order to keep the CD clean do

not touch the surface.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42

Comments to this Manuals

No comments

AEG AR 4023 DVD Instruction Manual Page 36

Comments to this Manuals

Related products and manuals for CD players AEG AR 4023 DVD