AEG AR 4023 DVD Instruction Manual download pdf (Page 32)

ENGLISH

1. Press the ST/PROG button (Fig. 1/19). You will now

see a table. Enter the required sequence here.

NOTE:

Your playlist will be lost when the device is switched

oorwhenanewCD/DVDisinserted.

2. Use the cursor buttons to navigate in the table

(Fig. 1/21).

3. Enter the desired title and the chapter (for DVDs) or a

track (for CDs/MP3s) in the respective table position.

Use the numerical buttons to do this (Fig. 1/11).

4. Save your entries by selecting the “Play“ command

on the bottom border of the table using the cursor

buttons (Fig. 1/21).

5. Conrm the command by pressing the ENTER button

(Fig. 1/22) of the remote control.

Clear Playlist

1. Press the ST/PROG button. You will now see a table.

2. Use the cursor buttons to control the “Clear” function

on the bottom border of the table.

3. Conrm the command by pressing the ENTER button

of the remote control.

4. To hide the table again, press the ST/PROG button.

Enlarging a screen section

You can change the screen section when viewing DVDs,

VCDs or images.

Press the ZOOM button (Fig. 1/8) to change the screen

section. Press the button several times to select the suit-

able zoom factor or to return to the original zoom factor.

NOTE:

With the cursor buttons (Fig. 1/21) you can move

through the zoomed image.

Changing the viewing angle

SomeDVDsoerthepossibilitytoselecttheviewing

angle.

Press the ANGLE button (Fig. 1/6) to change the viewing

angle.

NOTE:

If changing the Viewing Angle is not possible, the sym-

bol

will be displayed.

Repeatpressingthethebuttontochooseadierent

viewing angle, or to return to the original viewing angle.

Changing the default settings

A large number of default settings can be comfortably

changed via the screen menu.

Press the SETUP-button (Fig. 1/5) on the remote control

to start the menu for changing the default settings (only

in DVD mode).

NOTE:

Many of these default settings can be changed via both

theremotecontrolandthemenu.Thedierenceis:If

you change the default settings via the remote control,

these changes will only be valid until the DVD-Player is

switchedoortheDVDischanged.

However, any changes made in the menu are permanent.

Understanding the menu structure

The Setup menu has two menu levels:

• Main menu: The main level is represented by graphical

symbols.

• Sub-menu: The corresponding sub-menu options can

be found under each of the main menu options.

Using the menu

Navigation and selection

• UsetheCursor Buttons (Fig. 1/21) ( , ) on the

remote control to browse through the main menu.

• Incontrasttothis,youmustusetheCursor Buttons

( , ) to move in the sub-menu.

• SelectamenuoptionwiththeENTER-button

(Fig. 1/22).

• UsetheENTER-button also to select an option (e.g.

“PAL” in the illustration on the top). The selected op-

tion is now highlighted.

• Pressthecursor button return to the submenu.

Slide control

In some menus you will nd slide controls. The slide con-

trol is used as follows:

1. Select with the ENTER-button.

2. Move the control with the Cursor Buttons ( , ).

3. Conrm the entry with the ENTER-button.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 41 42

Comments to this Manuals

No comments

AEG AR 4023 DVD Instruction Manual Page 32

Comments to this Manuals

Related products and manuals for CD players AEG AR 4023 DVD