Aeg AIR AND POWER STATION LA 10 User Manual download pdf (Page 22)

▪ No valve adapter required to inflate car tyres.

First remove the cap from the tyre valve.

▪ Open the quick disconnect and attach the

automotive valve plug as far as possible onto the

tyre valve. Close the valve quick disconnect

when doing so.

▪ Verify the automotive valve lever plug is firmly

attached to the tyre valve by carefully pulling on

it.

Do not operate the compressor for more

than 10 minutes. After this time allow the

unit to cool down for 10 minutes!

Automotive, motorcycle- and bicycle tyres with

automotive valve (Schrader valve with 7.7 mm

thread diameter) can be inflated without adapter!

Select the appropriate valve adapter (e.g. ).

Open the valve quick disconnect by pressing

the quick disconnect lever away from the com-

pressed air hose . Now attach the valve

adapter and press the lever toward the com-

pressed air hose to close it (see Image 5).

Check the unit and compressed air hose for

damage before every use! Do not operate dam-

aged units! Review the manufacturer instructions

for the item to be inflated before every use.

Attention! Always wear suitable ear

protectors and safety goggles during

operation!

The unit can be operated with the built-in storage

battery or the built-in 12 V vehicle plug.

4.3 Operating the compressor

▪ Set the On / Off switch to ( I ). The unit is

now operational.

▪ To turn the lighting on set the lighting On / Off

switch to ( I ).

▪ To turn the LED lights off set the light

switch to ( O ).

▪ To power the unit off set the On / Off

switch to ( O ).

4.2 Operating the lighting

Automatic start warning! If the

On / Off switch for compressor

power is set to ( I ) before switching the

unit on, the compressor will automatically start

and compressed air will be supplied to the com-

pressed air hose. Risk of property damage

and personal injury!

▪ Set the On / Off switch to ( I ). The unit is

now operational and the manometer lighting

is activated. The LED lights indicate the

current capacity of the storage battery.

▪ In operational mode the 12 V vehicle outlet

is powered.

▪ To switch the unit off set the On / Off switch

to ( O ).

4.1 Powering the unit On / Off

4.0 OPERATION /

ACCESSORIES

Image 5

97180_Luft-Energiestation_LA_10_Manual _01_08_2012_print

Mittwoch, 1. August 2012 12:30:07

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

Comments to this Manuals

No comments

Aeg AIR AND POWER STATION LA 10 User Manual Page 22

Comments to this Manuals

Related products and manuals for Accessories for video Aeg AIR AND POWER STATION LA 10