AEG LAV60800 User Manual download pdf (Page 28)

Connecting to the water supply

Important!

• This appliance must not be connected to the hot water system.

• When connecting it, use only new hose kits.

• Only connect the appliance to the drinking water supply. Rain water

or water for industrial use may only be used if it fulfils the require-

ments of DIN1986 and DIN1988.

• Do not kink or crush the water inlet hose or drain hose.

Permitted water pressure

The water pressure must be at least 1bar (=10N/cm

=0.1MPa) and may

be a maximum of 10bar (=100N/cm

=1MPa).

– If more than 10bar: Connect a pressure reduction valve.

– If less than 1bar: Disconnect the appliance end of the inlet hose from

the solenoid inlet valve and remove the flow meter. (In addition re-

move the filter using pointed pliers and take out the rubber gasket

behind it.) Re-insert the filter.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

AEG LAV60800 User Manual Page 28