AEG L7FBE84W User Manual download pdf (Page 14)

As the programme is very quiet, it is

suitable for use at night time when

cheaper electricity tariffs are available.

In some programmes the rinses are

performed with more water.

If you touch the Start/Pauze - Départ

Pause button, the appliance performs

the only draining phase.

The appliance empties

the water out

automatically after 18

hours approximately.

• Only drain option (Skipping the

wash, rinse and spin phases) .

The appliance performs the only

draining phase of the selected

washing programme.

The display shows the indicator

(cold), and the indicator (no

spin) and the indicator .

• Only spin option (Skipping the wash

and rinse phases) .

The appliance performs only the

spinning phase of the selected

washing programme.

The display shows the indicator

(cold), the phase indicator and the

spin speed.

If it is necessary to reduce

the spin speed, select a

programme with a lower

spin speed as default.

6.5 Vlekken/Voorwas - Taches/

Prélavage

Press this button repeatedly to activate

one of the two options.

The relevant indicator goes on in the

display.

• Vlekken - Taches

Select this option to add an anti-stain

phase to a programme in order to

treat heavily soiled or stained laundry

with stain remover.

Pour the stain remover into

compartment

. The stain remover

will be added in the appropriate

phase of the washing programme.

This option is not

available with a

temperature lower than

40 °C.

• Voorwas - Prélavage

Use this option to add a pre-wash

phase at 30 °C before the washing

phase.

This option is recommended for

heavily soiled laundry, especially if

containing sand, dust , mud and other

solid particles.

The options can increase the

programme duration.

6.6 Plus Steam

This option adds a steam phase followed

by a short anti-crease phase at the end

of the washing programme.

The steam phase reduces fabric creasing

and facilitates the fabric ironing.

The indicator flashes on the display

during steam phase.

This option increases the

programme duration

slightly.

When the programme stops the display

shows a zero

, the indicator is

steady on and the indicator starts

flashing. The drum performs smooth

movements for about 30 minutes to keep

the steam benefit. By touching any

button the anti-crease movements stop

and the door unlocks.

A small laundry load helps to

reach better results.

6.7 Startuitstel - Départ différé

With this option you can delay the start

of a programme in a more convenient

time.

Touch repeatedly the button to set the

required delay. The time increases by

steps of 30 minutes up to 90' and from 2

hours up to 20 h.

www.aeg.com

14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Comments to this Manuals

No comments