AEG LF7E8432B User Manual

USER MANUALEN User ManualWashing MachineLF7E8432B

The end of the drain hosemust always be ventilated ,i.e. the inner diameter of thedrain pipe (min. 38 mm -min. 1.5") must be largerthan the exter

4.3 Stacking kitThe tumble dryer can be stacked on thetop of the washing machine only byusing the correct stacking kitmanufactured and approved by AEG

5.2 Appliance overview1 2 39567410811 121Worktop2Detergent dispenser3Control panel4Door handle5Rating plate6Drain pump filter7Feet for levelling the a

1Programme dial2Display3Eco touch button (Eco) 4Time saving touch button (TimeSave) 5Rinse touch button (Rinse) • Extra rinse option (Extra Rinse) • S

Washing phase indicator. It flashes during pre-wash and wash phase.Rinsing phase indicator. It flashes during rinse phase.When the Soft Plus option is

7.3 Temp. When you select a washing programme,the appliance automatically proposes adefault temperature.Touch this button repeatedly until thedesired

treat heavily soiled or stained laundrywith stain remover.Pour the stain remover intocompartment . The stain removerwill be added in the appropriatep

Set this option for slightly or normallysoiled items washed at 30°C or highertemperatures.Water and energy consumption maydepend on different causes,

Programme Programme descriptionWool/SilkMachine washable wool, hand washable wool and otherfabrics with «hand washing» care symbol1).Steam programmeSt

Programme Programme descriptionOutdoorDo not use fabric softener and make sure thatthere is no softener residue in the detergentdispenser.Outdoor clot

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...

Programme Default tempera-tureTemperaturerangeReference spinspeedSpin speed rangeMaximum loadDelicates40 °C40 °C - Cold1200 rpm1200 rpm - 400 rpm3 kgW

Cottons Synthetics Delicates Wool/Silk Steam Anti-Allergy 20 min. - 3 kg Outdoor Duvet Sports Drain only Spin only1)

9. SETTINGS9.1 IntroductionWhen pressing a keycombination, do not tiltyour fingers downwards .The sensors of theunderneath buttons aresensitive and ma

10. BEFORE FIRST USEDuring installation or beforefirst use you may observesome water in the appliance.This is a residual water left inthe appliance af

11.3 Filling the detergent andadditivesCompartment for prewash phase,soak programme or stain remover.Compartment for washing phase.Compartment for liq

With the flap in theposition DOWN:• Do not usegelatinous or thickliquid detergents.• Do not put moreliquid detergent thanthe limit shown onthe flap.•

1. Touch the Start/Pause button topause the appliance. The relatedindicator flashes.2. Touch the Delay Start buttonrepeatedly until the display showst

11.11 Cancelling a runningprogramme1. Press the button On/Off to cancelthe programme and to deactivatethe appliance.2. Press the button On/Off again t

1. If necessary, touch the Spin button todecrease the spin speed proposedby the appliance.2. Touch the Start/Pause button:• If you have set , the app

• Empty pockets and unfold the items.12.2 Stubborn stainsFor some stains, water and detergent isnot sufficient.We recommend that you pre-treat thesest

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible f

13.2 DescalingIf the water hardness in yourarea is high or moderate, werecommend that you use awater descaling product forwashing machines.Regularly e

122. Remove the top part of the additivecompartment to aid cleaning andflush it out under running warmwater, to remove any traces ofaccumulated deterg

122. Place a suitable bowl below the drainpump access to collect the water thatflows out.3. Open the chute downwards. Alwayskeep a rag nearby to dry u

2112. Close the pump cover.21When you drain the water with theemergency drain procedure, you mustactivate the drain system again:a. Put 2 litres of wa

45°20°13.9 Emergency drainIf the appliance cannot drain the water,carry out the same procedure, describedin 'Cleaning the drain pump' paragr

• - The mains supply is unstable.Wait until the mains supply is stable.• - No communication betweenelectronic elements of the appliance.Switch it of

Problem Possible solutionThe appliance does notdrain the water.• Make sure that the sink spigot is not clogged.• Make sure that the drain hose has no

Problem Possible solutionThe washing results arenot satisfactory.• Increase the detergent quantity or use a different deter-gent.• Use special product

5. Take out the laundry and then closethe appliance door.6. Close the filter flap.15. CONSUMPTION VALUESStated values are obtained in laboratory condi

Programmes Load(kg)Energyconsump-tion (kWh)Waterconsump-tion (litre)Approxi-mate pro-grammeduration(minutes)Remain-ing mois-ture (%)1)Standard 40°C co

– staff kitchen areas in shops, offices and otherworking environments;– by clients in hotels, motels, bed & breakfast andother residential type en

17. QUICK GUIDE17.1 Daily use1234• Connect the mains plug to the mainssocket.• Open the water tap.• Push the On/Off button to turn theappliance on (1)

Programmes Load Product descriptionCottons8 kgWhite cotton and coloured cotton. Standardprogrammes for the Energy Label consump-tion values.Synthetics

Energy consumption in kWh per year, based on 220standard washing cycles for cotton programmes at 60 °Cand 40 °C at full and partial load, and the cons

19. ENVIRONMENTAL CONCERNSRecycle materials with the symbol .Put the packaging in relevant containersto recycle it. Help protect theenvironment and h

www.aeg.com/shop157027050-A-492018

2. SAFETY INSTRUCTIONS2.1 InstallationThe installation must complywith relevant nationalregulations.• Remove all the packaging and thetransit bolts in

• You can extend the drain hose tomaximum 400 cm. Contact theAuthorised Service Centre for theother drain hose and the extension.2.4 UseWARNING!Risk o

3. Remove the internal film.4. Open the door and remove thepolystyrene piece from the door sealand all the items from the drum.5. Carefully put the ap

11. Pull out the plastic spacers.12. Put the plastic caps, that you find inthe user manual bag, in the holes.We recommend that youkeep the packaging a

20º20º45º45ºMake sure that the inlet hoseis not in vertical position.3. If necessary, loose the ring nut to setit in the correct position.4. Connect t