AEG L77480FL User Manual download pdf (Page 4)

1.6 Installation

• The appliance is heavy, be careful

when you move it.

• Do not transport your appliance with-

out the transit bolts, you can damage

internal components and cause leak-

ages or malfunctions.

• Do not install and connect a damaged

appliance.

• Make sure to remove all packaging

and transit bolts before first use.

• Make sure that the mains plug is dis-

connected from the mains socket dur-

ing installation.

• Do not install or use the appliance

where the temperature is less than 0

°C.

• When you install the appliance on a

carpet floor, make sure that there is air

circulation between the appliance and

the carpet. Adjust the feet to have the

necessary space between the appli-

ance and the carpet.

Water connection

• Do not connect the appliance with old

hoses. Only use new hoses supplied

with the appliance.

• Make sure not to cause damage to the

water hoses.

• Do not connect the appliance to new

pipes or pipes not used for a long

time. Let the water flow for some mi-

nutes, then connect the inlet hose.

• The first time you use the appliance,

make sure that the water hoses and

the couplings do not have leakages.

Electrical connection

• Make sure that the appliance is con-

nected to a correctly installed earthed

power outlet.

• Make sure that the electrical informa-

tion on the rating plate agrees with

the power supply.

• Do not use multiple plugs and exten-

sion cables. There is a risk of fire.

• Do not replace or change the mains

cable. Contact the service centre.

• Make sure not to cause damage to the

mains plug and cable.

• Connect the mains plug to the mains

socket only at the end of the installa-

tion. Make sure that there is access to

the mains plug after the installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the

mains plug.

• If this appliance is supplied from a

cord extension set or electrical porta-

ble outlet device, the cord extension

set or electrical portable outlet device

must be positioned so that it is not

subject to splashing or ingress of

moisture.

• If the supply cord of this appliance is

damaged, it must be replaced by the

manufacturer, its service agent or simi-

larly qualified persons to avoid a haz-

ard.

1.7 Discard the appliance

1.

Disconnect the mains plug from the

mains socket.

2.

Cut off the mains cable and discard

it.

3.

Discard the door catch. This pre-

vents children or pets being acci-

dentally closed inside the appliance.

There is a risk of suffocation (only for

front-loading appliances).

2. TECHNICAL INFORMATION

Dimensions Width / Height / Depth 605 / 850 / 605 mm

Total depth 640 mm

4

www.aeg.com/au

1 2 3 4 5 6 7 8 9 ... 35 36

Comments to this Manuals

No comments