AEG L77480FL User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
4)
The wash and spin phase is delicate to prevent the creases of the laundry. The appliance
adds some rinses.
5)
The default phase of the spin speed is related to cotton items. Set the spin speed. Make
sure that it agrees with the laundry. To select the DRAIN programme only, set the
function NO SPIN.
6)
Press Extra Rinse button to add rinses. With a low spin speed the appliance performs
delicate rinses and a short spin.
7)
Set this programme to decrease the time and the consumption of energy and water.
Use a special detergent for very low temperature.
8)
Set this programme to have good washing results and decrease the energy
consumption. The time of the washing programme is extended.
9)
Economy 60ºC programme is recommended for a full load of cotton and is the water
and energy rating programme in accordance with AS/NZS2040.2 and AS/NZS6400.
7. BEFORE FIRST USE
1.
To activate the drain system, put 2 li-
tres of water in the main wash com-
partment of the detergent dispens-
er.
2.
Put a small quantity of detergent in
the main wash compartment of the
detergent dispenser. Set and start a
programme for cotton at the highest
temperature without laundry. This
removes all possible dirt from the
drum and the tub.
8. USING THE APPLIANCE
1.
Open the water tap.
2.
Connect the mains plug to the mains
socket.
3.
Press button
1
to activate the ap-
pliance.
4.
Put the laundry in the appliance.
5.
Use the correct quantity of deter-
gent and additives.
6.
Set and start the correct programme
for the type of laundry and soil.
8.1 LOADING THE LAUNDRY
1.
Open the appliance door.
2.
Put the laundry in the drum, one
item at a time. Shake the items be-
fore you put them in the appliance.
Make sure not to put too much laun-
dry in the drum.
3.
Close the door.
12
www.aeg.com/au
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comments to this Manuals

No comments