AEG L75480WD User Manual download pdf (Page 20)

2.

Press the Start/Pause button

4

.

The appliance drain the water and

spin.

3.

When the programme is completed

and the door lock symbol goes off,

you can open the door

4.

Deactivate the appliance.

The appliance drain and spin au-

tomatically after approximately

18 hours.

9.11 Drying only

WARNING!

Open the water tap. Put the drain

hose in the sink or connect to the

drain pipe.

• Load the laundry.

• Turn the programme dial to the pro-

gramme suitable for the items to dry.

The drying symbol comes

on.

To have best performances in

drying when you wash the laun-

dry set a spin cycle at the maxi-

mum speed allowed for your

type of items.

You can dry your laundry in two ways:

With the automatic drying:

•

press the button

8

again and again

until a black line appears under one of

the dryness level symbol:

Extra dry symbol

Cupboard dry symbol

Iron dry symbol

• The display shows a time value, calcu-

lated on a default load size. If the

amount of your laundry is more or less

than the default size, the appliance

adjusts automatically the time value

during the cycle.

•

Press the button

4

to start the pro-

gramme.

The door locked symbol

comes on.

The drying symbol starts to

flash.

You cannot set all levels for all

type of laundry.

With the timed drying:

•

Press the button

7

again and again

to set the drying time value (see the

«Programme for timed drying» table).

The display shows a minimum time

value.

Set time value

• Each time you press this button the

time value increases by 5 minutes.

• After some seconds the time value on

the display changes: the appliance cal-

culates also the duration of the anti-

crease and the cooling phases.

Final time value

•

Press button

4

to start the pro-

gramme. The display shows the new

time value every minute.

The drying symbol starts

to flash.

The door locked symbol

comes on.

If you set the time value of only

10 minutes, the appliance per-

forms only a cooling phase.

At the end of the programme

• The appliance stops automatically.

• The acoustic signals operate.

•

In the display

comes on.

• The indicator of the Start/Pause but-

ton

4

goes off.

The last minutes of the drying cy-

cle the appliance performs the

anti-crease and the cooling pha-

ses.

•

Press button

1

to deactivate the ap-

pliance. After some minutes from the

end of the programme, the energy

saving function automatically deacti-

vates the appliance.

20

www.aeg.com

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 79 80

Comments to this Manuals

No comments