AEG L70260TL1 User Manual

L 70260 TL 1 EN User manual

6. WASHING PROGRAMMESProgrammeTemperatureType of loadmax. weight of loadCycledescriptionFunctionsCottons95° - ColdWhite and colouredcotton with normal

ProgrammeTemperatureType of loadmax. weight of loadCycledescriptionFunctionsDelicates40° - ColdDelicate fabrics asacrylics, viscose, pol-yester items

ProgrammeTemperatureType of loadmax. weight of loadCycledescriptionFunctionsQuick Intensive60° - 40°Quick washing pro-gramme, to be usedfor lightly so

6.1 Woolmark CertificateThe wool wash cycle of this machine hasbeen approved by The Woolmark Com-pany for the washing of machine washa-ble Woolmark pr

8. BEFORE FIRST USEPut a small quantity of detergent in themain wash compartment of the deter-gent dispenser. Set and start a pro-gramme for cotton at

Detergent compartment for washing phase.The marks MAX are the maximum levels for the quantity of de-tergent (powder or liquid).Compartment for liquid

The drain pump can operate fora short time when the appliancefills water.9.4 Interrupt a programme1.Press button 4 . The indicatorflashes.2.Press butt

• Remove the laundry from the appli-ance. Make sure that the drum is emp-ty.• Keep the door ajar, to prevent mildewand odours.• Close the water tap.Th

• Always start a washing programmewith the maximum load of laundry.• If necessary, use a stain remover whenyou set a programme with a low tem-perature

11.4 Detergent dispenserTo clean the dispenser:1.Remove the detergent dispenserand disconnect the two parts.2.Clean all the parts with water.3.Assembl

CONTENTS1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. SAFETY

11.6 The inlet hose filter andthe valve filterWARNING!• Disconnect the mains plugfrom the mains socket.To clean the water inlet filters:1.Close the wa

2.Put the end of the inlet hose in acontainer and let the water flow outof the hose.3.Do the Drain programme and let itoperate until the end of the cy

Problem Possible cause Possible solution A washing programmewithout the drain phaseis set.Set the drain programme. The function Rinse &Hold is o

Problem Possible cause Possible solutionThe appliancemakes an unusualnoise.Incorrect level of the ap-pliance.Adjust the level of the appli-ance. Refer

Spin speed Maximum 1200 rpm1) Connect the water inlet hose to a water tap with a 3/4'' thread.14. ENVIRONMENT CONCERNSRecycle the materials

ENGLISH 25

26www.aeg.com

ENGLISH 27

www.aeg.com/shop108805700-A-462012

1. SAFETY INFORMATIONBefore the installation and use of the appliance, careful-ly read the supplied instructions. The manufacturer isnot responsible i

• If the supply cord is damaged, it must be replaced bythe manufacturer, its service agent or similarly quali-fied persons in order to avoid a hazard.

Water connection• Make sure not to cause damage to thewater hoses.• The appliance is to be connected tothe water mains using the new sup-plied hose-se

3. PRODUCT DESCRIPTION2315469810117121Control panel2Lid3Lid button4Filter access door5Lever to move the appliance6Adjustable feet7Rating plate8Mains c

5. CONTROL PANEL1 2 3456789101On/Off button2Programme knob3Display4Start/Pause button 5Delay start button 6Time saving button 7Liquid detergent button

B • The default spin speed of the programme.•'No Spin'1) and 'Rinse Hold' symbols.C •The display symbols.2)Symbols DescriptionWash

5.6 Time save button 6Press the button 6 to decrease theprogramme duration.• Press one time to set 'Shortened dura-tion' for items with dail