AEG L6FBG48SC User Manual

USER MANUALEN User ManualWashing MachineL6FBG48SC

4.2 Appliance overview1 2 39567410811 121Worktop2Detergent dispenser3Control panel4Door handle5Rating plate6Drain pump filter7Feet for levelling the a

1Programme dial2Display3Eco touch button4Úspora času touch button5Máchánítouch button• Extra máchání option• Skipping wash phase Pouzemáchání6Start/

Spinning and draining phase indicator. It flashes during spin and drainphase.Child safety lock indicator.Energy saving indicators. The indicator app

creasing. The washing programmeends with water in the drum.The display shows the indicator .The door stays locked and the drumturns regularly to redu

If you select the Cottonprogramme at 40°C or 60°Cand no other options are set,the display shows theindicator ; these arethe standard cottonprogrammes

Programme Programme descriptionSyntetickéSynthetic items or mixed fabric items. Normal soil.JemnéDelicate fabrics such as acrylics, viscose and mixed

Programme Programme descriptionVypoušt./Odstřeď. To spin the laundry and to drain the water in the drum. All fab-rics, except woollens and delicate fa

Programme options compatibilityProgrammeBavlna Syntetické Jemné Vlna/Hedvábí Antialergický 20 min. - 3 kg Outdoor Lůžkoviny SportVypoušt./Odstřeď. Opt

7.2 Woolmark Apparel Care -BlueThe wool wash cycle of this machine hasbeen approved by The WoolmarkCompany for the washing of woolgarments labelled as

10. DAILY USEWARNING!Refer to Safety chapters.10.1 Activating the appliance1. Connect the mains plug to the mainssocket.2. Open the water tap.3. Press

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...

123. To use powder detergent, turn theflap up.4. To use liquid detergent, turn the flapdown.With the flap in theposition DOWN:• Do not usegelatinous o

In case a selection is notpossible, no indicator comeson and an acoustic signalsounds.10.6 Starting a programmewith the delay start1. Touch the Odlože

About 20 minutes after theprogramme start, theprogramme duration couldbe adjusted againdepending on the capacityof water absorption of thefabrics.The

When you activate theappliance again, the displayshow the end of the lastselected programme. Turnthe programme dial to set anew cycle.2. Remove the la

• Empty pockets and unfold.• Turn multilayered fabrics, wool anditems with printed illustrations insideout.• Pre-treat tough stains.• Wash heavy soil

12.1 External cleaningClean the appliance with mild soap andwarm water only. Fully dry all thesurfaces.CAUTION!Do not use alcohol, solventsor chemical

122. Remove the top part of the additivecompartment to aid cleaning andflush it out under running warmwater, to remove any traces ofaccumulated deterg

122. Place a suitable bowl below the drainpump access to collect the water thatflows out.3. Squeeze the two levers and pull thedrainage duct forward t

11. Put the filter back into the specialguides by turning it clockwise. Makesure that you tighten the filtercorrectly to prevent leakages.1212. Close

45°20°12.9 Emergency drainIf the appliance cannot drain the water,carry out the same procedure, describedin 'Cleaning the drain filter' para

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible f

• - The anti-flood device is on.Disconnect the appliance and closethe water tap. Contact the AuthorisedService Centre.WARNING!Deactivate the applianc

Problem Possible solutionThere is water on thefloor.• Make sure that the couplings of the water hoses are tightand there is not water leakages.• Make

14. CONSUMPTION VALUESStated values are obtained in laboratory conditions with relevant stand-ards. Different causes can change the data: the quantity

15. TECHNICAL DATADimension Width/ Height/ Depth/Total depth600 mm/ 850 mm/ 571 mm/ 600 mmElectrical connection VoltageOverall powerFuseFrequency230 V

Verify the compatiblestacking kit by checking thedepth of your appliances.The stacking kit can be used only withthe appliances specified in the leafle

ENGLISH 35

www.aeg.com/shop192943620-A-162017

• The appliance must be connected to the water mainsusing the new supplied hose sets, or other new hosesets supplied by the Authorised Service Centre.

electrical ratings of the mains powersupply.• Do not use multi-plug adapters andextension cables.• Make sure not to cause damage tothe mains plug and

3.1 UnpackingWARNING!Remove all the packagingand the transit bolts beforeinstalling the appliance.WARNING!Use the gloves.1. Use a cutter to cut throug

9. Remove the power supply cable andthe drain hose from the hose holders.It is possible to seewater flowing from thedrain hose. This is due tothe test

A correct adjustment of theappliance level prevents thevibration, noise and themovement of the appliancewhen in operation.3.3 The inlet hose1. Connect

Make sure that the drainhose end is not immersed inthe water. There may be areturn of dirty water into theappliance.3. To a stand pipe with vent-hole