AEG L61260TL User Manual download pdf (Page 21)

With some problems, the acoustic

signals operate and the display shows

an alarm code:

•

- The appliance does not fill with

water properly.

•

- The appliance does not drain

the water.

•

- The appliance door is open or

not closed correctly.

•

- The anti-flood device is on.

WARNING!

Deactivate the appliance before

you do the checks.

Problem Possible cause Possible solution

The appliance

does not fill with

water properly.

The water tap is closed. Open the water tap.

The water inlet hose is

damaged.

Make sure that the water inlet

hose has no damages.

The filters in the water

inlet hose is blocked .

Clean the filters. Refer to 'Care

and cleaning'.

The water tap is blocked

or is furred with lime-

scale.

Clean the water tap.

The connection of the

water inlet hose is not

correct.

Make sure that the connection

is correct.

The water pressure is

too low.

Contact your local water author-

ity.

The end of the drain

hose is too low.

Make sure that the drain hose is

in the correct position.

The appliance

does not drain the

water.

The water drain hose is

damaged.

Make sure that the water drain

hose has no damages.

The filter of the drain

pump is blocked.

Clean the filter of the drain

pump. Refer to 'Care and clean-

ing'.

The connection of the

water drain hose is not

correct.

Make sure that the connection

is correct.

A washing programme

without the drain phase

is set.

Set the drain programme.

The function Rinse &

Hold is on.

Set the drain programme.

The appliance

door is open or

not closed cor-

rectly.

Close the door correctly.

The anti-flood de-

vice is on.

• Disconnect the appliance.

• Close the water tap.

• Contact the service centre.

ENGLISH 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments