AEG BPE742720M User Manual download pdf (Page 12)

7. CLOCK FUNCTIONS

7.1 Clock functions table

Clock function Application

Minute

Minder

To set a countdown

(max. 2 h 30 min). This

function has no effect

on the operation of the

oven. You can also turn

it on when the oven is

turned off.

Use to turn on the

function. Press or

to set the minutes

and to start.

Duration

To set how long the

oven works (max. 23 h

59 min).

End Time

To set the switch-off

time for a heating func-

tion (max. 23 h 59 min).

If you set the time for a clock function,

the time starts to count down after 5

seconds.

If you use the clock

functions: Duration, End

Time, the oven turns off the

heating elements after 90 %

of the set time. The oven

uses the residual heat to

continue the cooking

process until the time ends

(3 - 20 minutes).

7.2 Setting the clock functions

Before you use the

functions: Duration, End

Time, you must set a heating

function and temperature

first. The oven turns off

automatically.

You can use the functions:

Duration and End Time at

the same time if you want to

automatically turn on and

turn off the oven on a given

time later.

The functions: Duration and

End Time do not work when

you use the core

temperature sensor.

1. Set a heating function.

2. Press again and again until the

display shows the necessary clock

function and the related symbol.

3. Press

or to set the necessary

time.

4. Press to confirm.

When the time ends, a signal sounds.

The oven turns off. The display shows a

message.

5. Press any symbol to stop the signal.

7.3 Heat + Hold

Conditions for the function:

• The set temperature is more than 80

°C.

• The function: Duration is set.

The function: Heat + Hold keeps

prepared food warm at 80 °C for 30

minutes. It turns on after the baking or

roasting procedure ends.

You can turn on or turn off the function in

the menu: Basic Settings.

1. Turn on the oven.

2. Select the heating function.

3. Set the temperature above 80 °C.

4. Press

again and again until the

display shows: Heat + Hold.

5. Press

to confirm.

When the function ends, a signal sounds.

www.aeg.com

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comments to this Manuals

No comments