AEG BE3003021M User Manual download pdf (Page 19)

9.4 Removing the shelf

supports

To clean the oven, remove the shelf

supports.

1. Pull the front of the shelf support

away from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove

it.

1

2

Install the shelf supports in the opposite

sequence.

9.5 Oven ceiling

WARNING!

Deactivate the appliance

before you remove the

heating element. Make sure

that the appliance is cold.

There is a risk of burns.

Remove the shelf supports.

You can remove the heating element to

clean the oven ceiling more easily.

1. Remove the screw which holds the

heating element. For the first time,

use a screwdriver.

2.

Carefully pull the heating element

down.

3. Clean the oven ceiling with a soft

cloth with warm water and a cleaning

agent, and let it dry.

Install the heating element in the

opposite sequence.

Install the shelf supports.

WARNING!

Make sure that the heating

element is correctly installed

and that it does not fall

down.

9.6 Cleaning the oven door

The oven door has three glass

panels.You can remove the oven door

and the internal glass panels to clean

them.

The oven door can close if

you try to remove the glass

panels before you remove

the oven door.

CAUTION!

Do not use the appliance

without the glass panels.

1. Open the door fully and hold the two

door hinges.

ENGLISH

19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Comments to this Manuals

No comments