AEG 600 KVA User's Guide download pdf (Page 27)

27UPS 20-30 kVA, 230 V 50/60 Hz output

User’s Guide

1026743

Revision B

The UPS supports two serial communication devices according to the table below.

Independent Multiplexed

Configuration XSlot-1 XSlot-2 Std. RS-232 port

Default #1 Any XSlot Module Any XSlot Module Not in use

Default #2 Any XSlot Module Relay Module Available

Default #3 Any XSlot Module Not in use Available

Default #4 Any XSlot Module Hot Sync card Available

Table 3 Typical XSlot conﬁgurations for UPS communication.

Web/SNMP Module (optional)

The module supports HTTP and SNMP compliant remote monitoring and shutdown for

the protected computer systems. It can be connected to a twisted-pair Ethernet network

(10/100BaseT) using an RJ45 connector.

The Web/SNMP module has a build-in switching hub that allows three (3) additional network

devices to be connected to the network without the requirement of additional network drops.

In addition, an Environmental Monitoring Probe (EMP) can be requested from the UPS

manufacturer to obtain humidity, temperature and two relay inputs. It is connected to the

communication port of the Web/SNMP module as option.

Figure 13 ConnectUPS-X Web/SNMP Module and Environmental Monitoring Probe (EMP).

AS/400 Relay Module (optional)

The Relay Module provides potential free relay interface for AS/400 connected computers and

industrial applications. The relay interface supports both 15-pin D-sub connector and terminal

block connections up to four (4) potential free relays.

The relay contacts are rated for 1 A, 30 Vac or 200 mA, 60 Vdc, and they have a galvanic

isolation from the other circuits of the UPS unit.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

No comments

AEG 600 KVA User's Guide Page 27