AEG NM 1714 Owner's Manual download pdf (Page 46)

SECTION 4.

TAKING CARE OF YOUR MACHINE

Cleaning the Bobbin Case and the Hook

Note :Tu rn off the power switch and/or unplug the

machine.

To dismantle shuttle race unit:

Raise the needle to its highest position and open

the hook cover.

Open the hinged latch of bobbin case and take it

out of the machine.

Open the hook race ring holders and remove the

shuttle race ring.

Remove the hook.

* Clean the hook race with a brush and a soft dry

cloth.

q Bobbin case

w Shuttle race ring holder

e Shuttle race ring

r Shuttle

t Shuttle race

To assemble shuttle race unit:

Shuttle the hook by the center pin and fit it

carefully back into the shuttle race, forming a

perfect circle with the shuttle driver.

Attach the shuttle race ring making sure the

bottom pin fits into the notch.

Lock the shuttle race ring by turning the holders

back into position. Insert the bobbin case.

y Pin

u Notch

Cleaning the Feed Dog

Remove the needle and the presser foot.

Remove the needle plate setscrew and remove

the needle plate.

With a brush, clean out dust and lint clogging the

feed dog teeth.

Reset the needle plate.

q Setscrew

CAUTION:

Turn off the power switch and/or unplug the

machine before cleaning the feed dog.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52 53

No comments

AEG NM 1714 Owner's Manual Page 46