AEG NM 1714 Owner's Manual download pdf (Page 22)

Stitch Selector Dial

Turn the stitch selector dial to the desired stitch at

the setting mark.

q Setting mark

z Correct tension

The thread tension is adjusted depending on

the sewing materials, layers of fabric and

sewing method.

For an ideal zigzag stitch, the bobbin thread

does not show on the right side (top side) of

the fabric, and the needle thread shows slightly

on the wrong side (bottomside) of the fabric.

q Needle thread (Top thread)

w Bobbin thread (Bottom thread)

e Right side (Top side) of fabric

r Wrong side (Bottom side) of fabric

t Thread tension dial

y Setting mark

x Needle thread tension is too tight

When the bobbin thread (bottom thread) will

appear on the right side (top side) of the fabric,

Loosen the needle thread tension by moving

the dial to a lower number.

c Needle thread tension is too loose

When the needle thread (top thread) will

appear on the wrong side (bottom side) of the

fabric, tighten the needle thread tension by

moving the dial to a higher number.

Thread Tension Dial

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 52 53

No comments

AEG NM 1714 Owner's Manual Page 22