AEG 510 D Operations Instructions download pdf (Page 73)

Protect PV.500 Operating Instructions

72 of 73 80000041664 BAL

You can use the “Inverter” menu item to display the statuses and

measured values for the inverter. You can toggle between the two

menus using the “>” and “<” keys.

In normal operation, the inverter can be switched on and off here,

using the top key. In the event of a deactivating fault, you can call

up a detailed description of the fault here. Once the fault has been

rectified, you will need to acknowledge it using the top key. A high-

voltage symbol “” will then appear on the top key.

## # ##

*  ((

## # ##

62#72

,-./   



62#7

,,-%/ 4 4 4

(,,,,-"5/ 02 ,,,-".%/ 

:,,-"/ 23 ;<, 

,,,,-89/ , =,,,-"5/ 7

,,,-?)/ , >



,,,-?)/ 4,

,,-"5/ 4770

,,,,-/ 20

Figure 42 Menu: Inverter

The voltage and current of the three phases are displayed as

measured values. The power values P, S, Q and cos-phi appear

underneath these voltages and currents.

These are then followed by the frequency F and the daily energy

The ambient temperature of cabinet T1 and the supply air temper-

ature of inverter stack T2 are shown as the temperatures.

Next come the total energy counter E and the inverter operating

hours counter t.

You can scroll through the measured values using the “v” and “^”

keys.

You can use the “COM interface” menu item to look up the status-

es of the communication PCBs.

You can use the “AUX signals” menu item to look up the status of

optional general signals on the remote signalling board.

1 2 ... 68 69 70 71 72 73 74

No comments

AEG 510 D Operations Instructions Page 73