AEG MRC 4126 P User Manual download pdf (Page 49)

English

Putting into function

• Selectaproperplaceforthedevicesuchasadry,andevennonslipareawhereyou

can easily operate the device.

• Ifstillinplace,removetheprotectionfoilfromthedisplay.

Inserting the power reserve battery

(not supplied)

If there is a power cut or the mains plug has been removed from the power socket, the

settings will be retained if the power reserve batteries are inserted.

1. Open the battery compartment on the underside.

2. Connect a 9 V, E compound battery to the supply connection. Please ensure the cor-

rect polarity.

3. Close the battery compartment again.

4. If the device is not used for a prolonged period of time, please take the batteries out in

order to prevent leakage of battery acid.

CAUTION:

Batteries are not to be disposed of together with domestic wastes. Dispose of the used

batteries at the relevant collection bin or at your dealer’s.

WARNING:

Donotexposethebatteriestohightemperaturesordirectsunlight.Neverthrowbatter-

ies into the ﬁre. There is a danger of explosion!

Power supply

• Insertthegridplugintoaproperlyinstalledthreeprongsocket.

• Makesurethegridvoltagecorrespondstotheguresontheratingplate.

• Ifyouhavenotinsertedabackupbattery,thestoredclocktimewillbelostassoonas

the power supply is interrupted.

Radio station tuning

1. Move the function switch (19) to the ON position.

2. Turn the tuning control in order to tune in to a station.

3. If reception is too weak, change the position of the dipole antenna in order to improve

the reception.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 85 86

No comments

AEG MRC 4126 P User Manual Page 49