AEG BP7304021M User Manual download pdf (Page 17)

9.1 Core temperature sensor

The core temperature sensor measures

the core temperature of the meat. When

the meat is at the set temperature, the

appliance deactivates.

There are two temperatures to set:

• The oven temperature: refer to the ta-

ble for roasting in the recipe book.

• The core temperature: refer to the ta-

ble for the core temperature sensor in

the recipe book.

Only use the core temperature

sensor supplied or the correct re-

placement parts.

1.

Activate the appliance.

2.

Put the tip of the core temperature

sensor (with

on the handle) into

the centre of the meat.

3.

Put the plug of the core temperature

sensor into the socket at the front of

the appliance. The display shows

and the default set core tem-

perature. The temperature is 60 °C

for the first operation, and the last

set value for each subsequent oper-

ation.

4.

Touch or to set the core

temperature.

5.

Touch or the settings save auto-

matically after 5 seconds.

Useful information:

You can set the core temperature

only when

flashes. If is in

the display but does not flash before

you set the core temperature, touch

and or to set a new val-

ue.

6.

Set the oven function and, if neces-

sary, the oven temperature.

The display shows the current core

temperature and the temperature

bar, which shows the relation be-

tween the set oven temperature and

the current oven temperature.

Useful information:

The core temperature sensor must

stay in the meat and in the socket

during the cooking.

While the appliance calculates the

approximate duration time, the val-

ue of the Count Up Timer function

shows in the Timer / residual heat

display. When the first calculation

ends, the Timer / residual heat dis-

play shows - and then the approxi-

mate duration of the cooking. The

appliance continues to calculate the

duration during the cooking. The

display updates at intervals with the

new duration value.

7.

When the meat is at the set core

temperature, the core temperature

and

flash. An acoustic signal

sounds for two minutes. Touch a

sensor field to deactivate the acous-

tic signal.

8.

Remove the core temperature sen-

sor from the socket and remove the

meat from the appliance.

WARNING!

Be careful when you remove the

core temperature sensor. It is

hot. There is a risk of burns.

9.

Deactivate the appliance.

When you put the core tempera-

ture sensor into the socket, you

cancel the settings for the clock

functions.

When you cook with the core tempera-

ture sensor, you can change the temper-

ature shown in the Temperature / Time

display. After you put the core tempera-

ture sensor in the socket and set an oven

function and temperature, the display

shows the current core temperature.

ENGLISH 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Comments to this Manuals

No comments