Aeg HG795440XB User Manual download pdf (Page 10)

These data are necessary to help you

quickly and correctly. These data are

available on the supplied rating plate.

• Model description .................

• Product number (PNC) .................

• Serial Number (S.N.) .................

Use the original spare parts only. They

are available at Service Force Centre and

approved spare parts shops.

7.1 Labels supplied with the

accessories bag

Stick the adhesive labels as indicated

below:

MOD.

PROD.NO.

SER.NO

DATA

MOD.

PROD.NO.

SER.NO

DATA

MODELMODEL

MOD.

PROD.NO.

SER.NO.

03 IT

MADE IN ITALY

TYPE

230V-50Hz

IP20

0049

1 2 3

1

Stick it on Guarantee Card and send

this part

2

Stick it on Guarantee Card and keep

this part

3

Stick it on instruction booklet

8. INSTALLATION

WARNING!

Refer to the Safety chapters.

WARNING!

The following instructions about

installation, connection and

maintenance must be carried out

by qualified personnel in compli-

ance with standards and local

regulations in force.

8.1 Important safety

requirements

This hob must be installed in accordance

with the Gas Safety (Installation and Use)

Regulations (Current Edition) and the IEE

Wiring Regulations (Current Edition).

For appliances installed in the Republic

of Ireland please refer to NSAI- Domes-

tic Gas Installation I.S. 813 Current Edi-

tions and the ETCI Rules for Electrical In-

stallations.

Provision for ventilation

Detailed recommendations are con-

tained in the following British Standards

Codes Of Practice: B.S. 6172/ B.S. 5440,

Par. 2 and B.S. 6891 Current Editions.

The hob should not be installed in a bed

sitting room with a volume of less than

20 m³. If it is installed in a room of vol-

ume less than 5 m³ an air vent of effec-

tive area of 100 cm² is required. If it is in-

stalled in a room of volume between 5

10

www.aeg.com

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments