Aeg BE2003021W User Manual download pdf (Page 27)

Replacing the oven lamp:

1. You can find the lamp glass cover at the left side of the cavity.

Remove the left shelf rail.

2. Use a narrow, blunt object (for example

a teaspoon) to remove the glass cover.

Clean the glass cover.

3. If necessary, replace the oven lamp with

applicable 300°C heat-resistant oven

lamp.

Use the same oven lamp type.

4. Install the glass cover.

5. Install the left shelf rail.

Oven door and glass panels

To clean the oven door, remove it.

CAUTION!

Be careful when you remove the door from the appliance. The door is heavy!

Removing the oven door

1. Open the oven door as far as it goes.

2. Fully press clamping levers (A) on the two

door hinges.

3. Close the oven door until the first position

(angle approximately 70°).

4. Hold of the oven door with one hand on

each side and pull it away from the oven

at an up angle.

To install the door follow the procedure in re-

verse.

The number of glass panels if different for the different models.

CAUTION!

Put the oven door with the outer side down on a soft and level surface to prevent scratches.

Removing and cleaning the door glass panels

1. Remove the oven door.

Care and cleaning

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

No comments

Aeg BE2003021W User Manual Page 27