AEG BP301352WM User Manual download pdf (Page 12)

Press again and again to

switch between the clock

functions.

To confirm the settings of

the clock functions, press

or wait 5 seconds for an

automatic confirmation.

6.2 Setting the DURATION or

END

1. Set an oven function.

2. Press again and again until the

display shows

or .

or flashes in the display.

3. Press

or to the set the values

and press to confirm.

For Duration first you set the minutes

and then the hours, for End first you

set the hours and then the minutes.

An acoustic signal sounds for 2 minutes

after the time ends.

or symbol

and time setting flash in the display. The

oven stops.

4. Press any button to stop the acoustic

signal.

5. Turn the knob for the oven functions

to the off position.

If you press when you set

the hours for DURATION

, the appliance goes to

setting of the END

function.

6.3 Setting the MINUTE

MINDER

1. Press again and again until and

"00" flash in the display.

2. Press or to set the MINUTE

MINDER.

First you set the seconds, then the

minutes and then the hours.

At first, the time is calculated in

minutes and seconds. When the time

you set is longer than 60 minutes, the

symbol comes on in the display.

The appliance now calculates the time in

hours and minutes.

3. The MINUTE MINDER starts

automatically after five seconds.

After 90% of the set time, an acoustic

signal sounds.

4. When the set time ends, an acoustic

signal sounds for two minutes.

"00:00" and flash in the display.

Press any button to stop the acoustic

signal.

If you set the MINUTE

MINDER when the

DURATION or END

function operates, the

symbol comes on in the

display.

6.4 Count Up Timer

Use the Count Up Timer to monitor how

long the oven operates. It is on

immediately when the oven starts to

heat.

To reset the Count Up Timer, press and

hold and . The timer starts to count

up again.

The Count Up Timer cannot

be used with the functions:

Duration , End .

7. USING THE ACCESSORIES

WARNING!

Refer to Safety chapters.

7.1 Inserting the accessories

Wire shelf:

Push the shelf between the guide bars of

the shelf support and make sure that the

feet point down.

www.aeg.com12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comments to this Manuals

No comments