AEG 47132MM-MN User Manual download pdf (Page 23)

11.3 Catalytic cleaning

CAUTION!

Do not clean the catalytic

surface with oven sprays,

abrasive cleaning agents,

soap or other cleaning

agents. This will damage the

catalytic surface.

Spots or discolouration of

the catalytic surface have no

effect on catalytic

properties.

WARNING!

Keep children away when

you clean the oven at a high

temperature. The oven

surface becomes very hot

and there is a risk of burns.

CAUTION!

Always turn the oven light on

while using the catalytic

cleaning (if applicable).

Before activating the

catalytic cleaning remove all

the accessories from the

oven.

The walls with a catalytic coating are self-

cleaning. They absorb fat which collects

on the walls while the appliance

operates.

To support the self-cleaning procedure,

heat the empty oven on a regular basis.

1. Clean the oven floor with warm water

and washing up liquid, then dry it.

2. Set the oven temperature to 250 °C

and let the oven operate for 1 hour.

3. When the appliance is cool, clean it

with a soft and moist sponge.

11.4 Removing the shelf

supports

To clean the oven, remove the shelf

supports.

1. Pull the front of the shelf support

away from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove

it.

2

1

The retaining pins on the

telescopic runners must

point to the front.

Install the shelf supports in the opposite

sequence.

CAUTION!

Make sure that the longer

fixing wire is in the front. The

ends of the two wires must

point to the rear. Incorrect

installation can cause

damage to the enamel.

11.5 Removing and cleaning

the door glasses - top oven

The door glass in your

product can be different in

type and shape from the

examples you see in the

image. The number of

glasses can also be different.

1. Open the door.

2. Hold the door trim on the top edge

of the door at the two sides and push

inwards to release the clip seal.

ENGLISH

23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Comments to this Manuals

No comments