AEG HC452021EB User Manual download pdf (Page 28)

5.4 Activating and

deactivating the outer rings

You can adjust the surface you cook to

the dimension of the cookware.

Use sensor field:

To activate the outer ring: touch the

sensor field. The indicator comes on.

To activate more outer rings: touch the

same sensor field again. The subsequent

indicator comes on.

To deactivate the outer ring: touch the

sensor field until the indicator goes out.

When you activate the zone

but do not activate the outer

ring the light that comes out

from the zone may cover the

outer ring. It does not mean

that the outer ring is

activated. To see if the ring

is activated check the

indicator.

5.5 Automatic Heat Up

Activate this function to get a desired

heat setting in a shorter time. When it is

on, the zone operates on the highest

setting in the beginning and then

continues to cook at the desired heating

setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch

( comes on).

Immediately touch a desired heat

setting. After 3 seconds comes on.

To deactivate the function: change the

heat setting.

5.6 Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the cooking zone then set the

function.The selection of the Timer

function is possible for cooking zones

that are active and after the heat setting

is set.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on. When

this function is active, comes on.

To activate the function: touch of

the timer to set the time (00 - 99

minutes). When the indicator of the

cooking zone starts to flash slowly the

time counts down.

To see the remaining time: set the

cooking zone with . The indicator of

the cooking zone starts to flash quickly.

The display shows the remaining time.

To change the time: set the cooking

zone with

. Touch or .

To deactivate the function: set the

cooking zone with

and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

When the time comes to an

end, the sound operates and

00 flashes. The cooking

zone deactivates.

To stop the sound: touch .

CountUp Timer (The count up

timer)

You can use this function to monitor how

long the cooking zone operates.

To set the cooking zone (if more than

1 cooking zone operates): touch

again and again until the indicator of a

necessary cooking zone comes on. When

this function is active, comes on.

To activate the function: touch . The

symbol goes out and comes on.

To see how long the cooking zone

operates: set the cooking zone with .

The indicator of the cooking zone starts

to flash quickly. The display shows how

long the zone operates. During the first

minute the display shows the time in

seconds. After the first minute the

display shows the time in minutes.

www.aeg.com28

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments