AEG A 40100 GS Operations Instructions download pdf (Page 9)

Installation

Levelling

The appliance must be level. Level the

appliance by adjusting the two

adjustable feet (1) at the front of the

appliance.

If required the washer (2) can be

removed.

Reversing the Door

The side at which the door opens can be changed from the right side(as

supplied) to the left side, if the installation site requires.

Warning! When changing the side at which the door opens, the appliance

must not be connected to the mains. Remove plug from the mains

beforehand.

Tilt the appliance backwards, resting the top edge of the appliance on a stool

or something similar.

Unscrew the adjustable feet

situated on both sides at the

front (2 pieces). Remove the

lower door hinge plate by

unscrewing the 3 retaining

screws.

Remove the hinge pin from the

bottom of the door.

Slot the hinge pin into the hole

in the hinge plate.

Take the door off.

Refit the upper hinge pin into

the opposite location.

Fit the door in place on the

hinge pin.

Slot the hinge pin into the hole

in the hinge plate and relocate

the hinge assembly to the

opposite location and refit using

the retaining screws.

Refit the bottom hinge plate

assembly on the opposite side,

taking care that the edge of the

door is parallel with the side of

the cabinet.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

No comments

AEG A 40100 GS Operations Instructions Page 9