AEG PE 8036-M Specifications Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 23
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
4/23
- If the machine will not be used for
long periods, change the water in
the reservoir and make the boiler
empty by making the machine
deliver about half a litre of water
(see chapter 8.Hot water).
FILL UP THE COFFEE BEANS
CONTAINER
Push the cabinet block button
(E/1).
Take the coffee machine out of
the cabinet using the special
telescopic runners (E/2).
Put into the coffee container,
situated on the right side of the
appliance, about 200 gr. of coffee
beans (H).
Push again the coffee machine
into its relative seat as before
(F/1) using the special runners.
Push again the cabinet block
button (F/2) so that the machine
will be well fastened.
STARTING PROCESS
Turn the coffee machine on
pushing the switch button ON (B-
20). The red warning light (B-25)
indicates the device working
condition (lighted lamp ON/ lamp
out OFF).
Make the machine deliver hot
water (see paragraph 7. Hot
water) and wait until the air
contained in the boiler has been
completely gone out through the
steam pipe (A-2) and water
comes out (repeat many times
this operation if necessary) and
then turn the knob off (B-18).
Meanwhile the water temperature
indicator lights up (B-26). It
indicates the water heating
process in the boiler. When the
light goes out it means that the
machine has reached the right
temperature and is ready for
coffee.
RESET OF STANDARD VALUES
The coffee machine comes out of
the factory set for the ideal Italian
espresso coffee, as approved by
the coffee University of Naples
and in accordance with ILLY
standard. The setting values for
long coffee, on the contrary, are
in accordance wit h German
standard.
If these standard values have to
be reset, just turn the machine on
pushing at the same time the
switch button ON/OFF (B-20) and
the steam button (B-23). The
blinking of the indicator lights
indicates that the above-
mentioned standard values have
been reset.
Downloaded from CoffeeMachineManual.com Manuals
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 22 23

Comments to this Manuals

No comments