AEG T75175AV User Manual download pdf (Page 12)

8.1 Adjustment of the

remaining laundry moisture

degree

To change the default degree of the

remaining moisture of the laundry:

1. Use the programme knob to set any

programme.

2. Wait approximately 8 seconds.

3. Press and hold buttons (A) and (E) at

the same time.

One of the these indicators comes on:

• the maximum dry laundry

•

the more dry laundry

• the standard dry laundry

4. Press the button (F) again and again

until the indicator of the correct level

comes on.

5. To confirm the adjustment, press and

hold buttons (A) and (E) at the same

time for approximately 2 seconds.

8.2 Child lock function

This option prevents children to play with

the appliance while a programme

operates. The programme knob and the

touchpads are locked.

Only OFF switch is unlocked.

Activating the child lock

option:

1. Use the programme knob to set any

programme.

2. Wait approximately 8 seconds.

3. Press and hold touchpads (C) and (D)

at the same time. The child lock

indicator comes on.

The child lock indicator comes on.

It is possible to deactivate

the child lock option while a

programme operates. Press

and hold the same

touchpads until the child

lock indicator goes off.

8.3 Buzzer permanent off

To deactivate or activate the acoustic

signals, press and hold for approximately

2 seconds touchpads (A) and (B) at the

same time.

9. BEFORE FIRST USE

Before you use the appliance for the first

time do these operations:

• Clean the tumble dryer drum with a

moist cloth.

• Start a short programme (e.g. 30

minutes) with moist laundry.

10. DAILY USE

10.1 Start a programme

without delay start

1. Prepare the laundry and load the

appliance.

CAUTION!

Make sure that when you

close the door, the

laundry does not catch

between the appliance

door and the rubber

seal.

2. Set the correct programme and

options for the type of load.

The display shows the programme

duration.

3. Press the Start/Pauze (Start/Pause)

touchpad.

The programme starts.

10.2 Starting the programme

with delay start

1. Set the correct programme and

options for the type of load.

2. Press the delay start button again

and again until the display shows the

delay time you want to set.

www.aeg.com12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Comments to this Manuals

No comments