AEG LP6481 User Manual download pdf (Page 22)

If the appliance is

overloaded, remove

some items from the

drum and/or keep

pressed the door and

push the Start/Pause

Départ/Pause button at

the same time until the

indicator stops

flashing (see the picture

below).

• - The mains supply is unstable.

Wait until the mains supply is stable.

• - No communication between

electronic elements of the appliance.

Switch off and switch on again.

• - The anti-flood device is on.

Disconnect the appliance and close

the water tap. Contact the Authorised

Service Centre.

WARNING!

Deactivate the appliance

before you do the checks.

13.2 Possible failures

Problem Possible solution

The programme does

not start.

Make sure that the mains plug is connected to the mains sock-

et.

Make sure that the appliance door is closed.

Make sure that there is not a damaged fuse in the fuse box.

Make sure that the Start/Pause has been pressed.

If the delay start is set, cancel the setting or wait for the end of

countdown.

Deactivate the Child Lock function if it is on.

The appliance does not

fill with water properly.

Make sure that the water tap is open.

Make sure that the pressure of the water supply is not too low.

For this information, contact your local water authority.

Make sure that the water tap is not clogged.

Make sure that the filter of the inlet hose and the filter of the

valve are not clogged. Refer to “Care and cleaning”.

Make sure that the inlet hose has no kinks or bends.

www.aeg.com22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Comments to this Manuals

No comments

AEG LP6481 User Manual Page 22

Comments to this Manuals

Related products and manuals for Washing machines AEG LP6481