AEG LAV88830-W User Manual download pdf (Page 34)

Operating Instructions

Washing is not well

spun. Residual water is

still visible in the drum.

Fault code

(2 appears.

Drainage hose bent. Remove the bend.

Maximum pump head (drain-

age height 1m from the floor

under the unit) is exceeded.

Contact your customer serv-

ice. For pumping heights

over lm he can offer you a

conversion kit as a special

accessory.

Solution pump blocked.

Switch off the unit and pull

out the mains plug. Clean

the solution pump.

If a siphon is connected: Si-

phon blocked.

Clean the siphon.

The door cannot be

opened when the unit

is switched on.

Door locked for safety re-

asons (display DOOR/LIGHT

not illuminated from be-

hind).

Wait until DOOR/LIGHT is il-

luminated green from be-

hind.

The program saving function

is set.

Cancel the program saving

function (see "Program Sav-

ing").

The washing machine is in

Stand-by mode.

Press the button DOOR/

LIGHT again.

Remnants of detergent

are building up in the

detergent drawer.

Water tap not fully opened. Open the water tap fully.

Filter in the screw connec-

tion of the intake hose on

the water tap or on the unit

is blocked.

Close the water tap. Unscrew

the intake hose from the wa-

ter tap and from the unit.

Clean the filter.

The rinsing water is

murky.

The cause is probably a de-

tergent with a high silicate

content.

No negative impact on the

rinsing results, possibly use

liquid detergent.

No illumination when

pressing an additional

program.

The selected additional pro-

gram cannot be combined

with the set program.

Make another selection.

Only END is illuminated

from behind.

The washing machine is in

Stand-by mode.

Press any button.

Problem Possible Cause Remedy

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 59 60

Comments to this Manuals

No comments

AEG LAV88830-W User Manual Page 34

Comments to this Manuals

Related products and manuals for Washing machines AEG LAV88830-W