AEG LAV88830-W User Manual download pdf (Page 32)

Operating Instructions

32

Water is not running.

Fault code

(1 appears.

Water tap is closed. Open the water tap.

Filter in screw connection of

the intake hose blocked.

Close the water tap.

Unscrew the hose from the

tap, remove the sieve and

clean under running water

Water tap is blocked with

limescale or is faulty.

Check water tap and have it

repaired if necessary.

The washing machine

vibrates during opera-

tion or it is on an une-

ven surface.

The transport packaging has

not been removed.

Remove transport packaging

according to the installation

and connection instructions.

The height-adjustable screw

feet are not correctly set.

Adjust the feet according to

the installation and connec-

tion instructions.

There is not much washing in

the drum (e.g. only one

dressing gown).

This does not impair the

function.

The water could not be com-

pletely pumped off before

spinning because

the drainage hose is bent or

the solution pump is blocked.

Check the laying of the

drainage hose and eliminate

the bend if necessary, or

clean the solution pump and,

if required, remove foreign

bodies from the pump hous-

ing.

The washing solution

of the main wash

froths up a lot.

Too much detergent was

probably used

Meter the detergent exactly

in accordance with the man-

ufacturer's information.

Problem Possible Cause Remedy

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Comments to this Manuals

No comments