AEG LAV86820-W User Manual download pdf (Page 31)

Operating instructions

31

Washing is creased.

Too much washing was

placed in the appliance.

Put less washing in the

appliance.

The fill-in door cannot

be opened when the

appliance is switched

on.

The door is lokked for safety

reasons (display DOOR/LIGHT

is not illuminated).

Wait until DOOR/LIGHT is

illuminated in green.

Program protection is set.

Program protection is deacti-

vated (see "Program Protec-

tion").

The washing machine is in

standby mode.

Press button DOOR/LIGHT

again.

Remnants of detergent

are building up in the

detergent drawer.

Tap is not fully open. Open tap completely.

The sieve in the coupling of

the inlet hose at the tap is

clogged.

Clean sieve.

The sieve in the coupling of

the inlet hose at the appli-

ance is clogged.

Clean sieve.

Rinse water is cloudy.

The cause is probably a

detergent with a high silicate

content.

No negative impact on the

rinsing results, possibly use

liquid detergent.

No illumination when

pressing an additional

program.

The additional program

selected cannot be combined

with the program set.

Make another choice.

Only END is illumi-

nated.

The washing machine is in

standby mode.

Press any button.

Only WASH TIME is

illuminated. A number

between 1 and 19

appears at the multi-

display.

Start delay timer is running,

the washing machine is in

stand-by mode.

If you press any button the

machine will leave stand-by

mode.

Program run display

flashes constantly.

Program protection is

switched on; the program

selector has been moved

during the washing cycle.

Return program selector to

its original position (see

"Program Protection").

Malfunction Possible Cause Remedy

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

Comments to this Manuals

No comments